YC SOLUTION Product & Solution Center

Solar Panel Recycling Products and Process Solutions

Compare four process routes and the 19 equipment modules used from incoming-module inspection through precision dismantling, crushing, sorting and recovered-material upgrading.

Choose by module condition and project target

Four PV Module Recycling Routes

Purely Physical Precision Disassembly

Precision removal of junction boxes, aluminum frames, glass and residual layers for intact or lightly damaged single- and double-glass modules.

Physical + Pyrolysis

Mechanical pre-separation followed by selected low-temperature pyrolysis to improve layer liberation and downstream material purity.

Pure Physical Crushing for Damaged Panels

Chemical-free crushing, particle-size control and physical sorting for severely broken, deformed or irregular modules.

Pure Pyrolysis

Controlled low-oxygen thermal treatment with integrated heat recovery, tail-gas engineering and downstream physical sorting.

Pre-processing & Inspection

Pre-processing & Inspection

자동 로딩 시스템

An intelligent front-end module handling station that identifies position, adapts to panel dimensions and feeds modules into the recycling line with stable orientation.

Pre-processing & Inspection

초음파 세척 시스템

A configurable cleaning and drying station that removes surface contamination before visual inspection, testing and precision dismantling.

Pre-processing & Inspection

AI 지능형 탐지 시스템

A machine-vision decision station that identifies module dimensions, orientation and visible condition, then routes panels toward reuse evaluation or the appropriate recycling process.

Pre-processing & Inspection

에클론 사용 테스트 장비

An optional testing station that combines electrical and imaging data to distinguish reusable modules from panels that should enter recycling.

Precision Dismantling

Precision Dismantling

자동 전선 절단 및 J-박스 제거

A patented pre-treatment station that organizes cables, locates junction boxes and removes them without requiring manual wire pre-cutting.

Precision Dismantling

프레임 분해 장비

A flexible-force aluminum-frame removal station designed for different frame thicknesses, multi-level clips and single- or double-glass module structures.

Precision Dismantling

라미네이트 가장자리 접착제 제거 장비

A preparation station that removes residual edge adhesive and frame-bonding material before glass or layer separation.

Precision Dismantling

예열 장비

A controlled thermal-conditioning station that prepares the laminate for mechanical glass or layer separation without making thermal treatment the main process route.

Precision Dismantling

유리 분리 장비

A precision physical separation station using staged heating and purpose-developed rotary tooling to remove glass from single- and double-glass PV modules.

Precision Dismantling

장비 뒤집기

An in-line orientation station that turns the laminate safely between front- and rear-side treatment steps.

Precision Dismantling

필름 및 셀 박리 장비

A layer-liberation station for separating encapsulant, backsheet or cell-bearing laminate after frame and glass removal.

Precision Dismantling

Surface Grinding Equipment

A precision backsheet or residual-layer removal station using controlled grinding depth and densely arranged diamond tooling.

Size Reduction & Sorting

Size Reduction & Sorting

기류 분리 장비

A density-based physical separation station that classifies light film-rich fractions and heavier glass, silicon or metal-bearing material after screening.

Size Reduction & Sorting

파쇄 및 분류 장비

An intelligent physical treatment system that moves material from coarse pieces to controlled particle sizes and then from mixed feed toward classified fractions.

Size Reduction & Sorting

검사 장비

A particle-size classification station that stabilizes feed before air separation, eddy-current separation or fine material upgrading.

Size Reduction & Sorting

선형 진동 스크린

An optional vibration-classification unit for separating glass-rich material and preparing a stable particle-size range for subsequent sorting.

Size Reduction & Sorting

유리 분류 장비

An optional downstream separation station for upgrading recovered glass by removing remaining mixed particles according to the project target.

Material Value Upgrading

Material Value Upgrading

정션 박스 처리 장비

An optional downstream unit for further dismantling recovered junction boxes and separating cable, plastic housing and metal-bearing components.

Material Value Upgrading

프레임 자동 세척 장비

An optional post-removal station that strips residual adhesive and contamination from recovered aluminum frame sections.

한국어