YC SOLUTION Product & Solution Center

Solar Panel Recycling Products and Process Solutions

Compare four process routes and the 19 equipment modules used from incoming-module inspection through precision dismantling, crushing, sorting and recovered-material upgrading.

Choose by module condition and project target

Four PV Module Recycling Routes

Purely Physical Precision Disassembly

Precision removal of junction boxes, aluminum frames, glass and residual layers for intact or lightly damaged single- and double-glass modules.

Physical + Pyrolysis

Mechanical pre-separation followed by selected low-temperature pyrolysis to improve layer liberation and downstream material purity.

Pure Physical Crushing for Damaged Panels

Chemical-free crushing, particle-size control and physical sorting for severely broken, deformed or irregular modules.

Pure Pyrolysis

Controlled low-oxygen thermal treatment with integrated heat recovery, tail-gas engineering and downstream physical sorting.

Pre-processing & Inspection

Pre-processing & Inspection

自動ローディングシステム

An intelligent front-end module handling station that identifies position, adapts to panel dimensions and feeds modules into the recycling line with stable orientation.

Pre-processing & Inspection

超音波洗浄システム

A configurable cleaning and drying station that removes surface contamination before visual inspection, testing and precision dismantling.

Pre-processing & Inspection

AIインテリジェント検出システム

A machine-vision decision station that identifies module dimensions, orientation and visible condition, then routes panels toward reuse evaluation or the appropriate recycling process.

Pre-processing & Inspection

エシュロン試験機

An optional testing station that combines electrical and imaging data to distinguish reusable modules from panels that should enter recycling.

Precision Dismantling

Precision Dismantling

自動ワイヤーカット＆Jボックス取り外し

A patented pre-treatment station that organizes cables, locates junction boxes and removes them without requiring manual wire pre-cutting.

Precision Dismantling

フレーム分解装置

A flexible-force aluminum-frame removal station designed for different frame thicknesses, multi-level clips and single- or double-glass module structures.

Precision Dismantling

ラミネートエッジ接着剤除去装置

A preparation station that removes residual edge adhesive and frame-bonding material before glass or layer separation.

Precision Dismantling

予熱装置

A controlled thermal-conditioning station that prepares the laminate for mechanical glass or layer separation without making thermal treatment the main process route.

Precision Dismantling

ガラス分離装置

A precision physical separation station using staged heating and purpose-developed rotary tooling to remove glass from single- and double-glass PV modules.

Precision Dismantling

反転装置

An in-line orientation station that turns the laminate safely between front- and rear-side treatment steps.

Precision Dismantling

フィルム＆セル剥離装置

A layer-liberation station for separating encapsulant, backsheet or cell-bearing laminate after frame and glass removal.

Precision Dismantling

Surface Grinding Equipment

A precision backsheet or residual-layer removal station using controlled grinding depth and densely arranged diamond tooling.

Size Reduction & Sorting

Size Reduction & Sorting

気流分離装置

A density-based physical separation station that classifies light film-rich fractions and heavier glass, silicon or metal-bearing material after screening.

Size Reduction & Sorting

破砕・選別装置

An intelligent physical treatment system that moves material from coarse pieces to controlled particle sizes and then from mixed feed toward classified fractions.

Size Reduction & Sorting

スクリーニング装置

A particle-size classification station that stabilizes feed before air separation, eddy-current separation or fine material upgrading.

Size Reduction & Sorting

リニア振動スクリーン

An optional vibration-classification unit for separating glass-rich material and preparing a stable particle-size range for subsequent sorting.

Size Reduction & Sorting

ガラス選別装置

An optional downstream separation station for upgrading recovered glass by removing remaining mixed particles according to the project target.

Material Value Upgrading

Material Value Upgrading

ジャンクションボックス加工設備

An optional downstream unit for further dismantling recovered junction boxes and separating cable, plastic housing and metal-bearing components.

Material Value Upgrading

フレーム自動洗浄装置

An optional post-removal station that strips residual adhesive and contamination from recovered aluminum frame sections.

日本語